Architect v Technician
- This topic has 23 replies, 9 voices, and was last updated 21 years, 3 months ago by
.
- Posts
I hope that I don’t start a war but would appreciate a genuine answer.
I am currently attempting to start getting ready to build a one off house in Kildare. A million people have being giving me advice – to be honest it is doing my head in!! But one of the issues that keeps coming up is who should I use to design my house.
I have met with several architects and I finally selected one – however 3 weeks into the project he told me that he is now leaving the company and that he can’t work on it anymore. Thankfully we had not got too involved by that stage. Now we are looking again.
But the issue that I am looking at now is that the cost of the architect will come to over €48k!! In comparison a engineer / draughtsman will cost only 3k. That is a massive saving for my budget. WHY?
Honestly – what is the difference??? I presume that you are going to say it is the same as Monet v a 3 yr old kid – but try and tell me the real difference.
We have done a lot of work researching the type of house that we like etc – mood boards, pic of other houses etc. Is that enough to just go to a draughtsman?? Or will I have far more work to do with the technician as opposed to an architect.
I would appreciate if someone could educate me – because at the moment I really don’t see why it is going to cost me an extra 45k.
I appreciate any assistance that you can offer.
Thanks.
twenty8,
That is a very interesting question and one that Architects are asked constantly. There is no doubt that a Technician will be, in the short term, more cost effective. So in paying larger fees to an Architect what will you get for your money?
A good Architect will be involved at an early planning stage, listening to what you want, and helping you create the perfect building for your needs. Working with you, developing ideas and suggesting new directions; helping you to realise your dream.
An Architect can guide you through the building and planning regulations and help you avoid costly mistakes. They can also co-ordinate engineers, builders and sub-contractors giving you one point of contact to save you time, and make sure things run smoothly.
A well designed building can save you money – a good architect will consider different materials and methods to reduce building and maintenance costs.
All Chartered Architects will have undergone 7 years of training at University enabling them to have tremendous skills at visualizing a whole project, homing in on the problems and offer dynamic solutions. Architects will have contacts with excellent builders and the finished work can add significant value to your property.
For the FEE an Architect will manage the project from start to finish, in most cases the TECHNICIAN will usually only offer a drawing only service. Most architects will expect the contractor to enter into a formal building contract giving you, the client rights and piece of mind that you are protected by the law.
45K does sound on the steap side, but then it is hard for me to comment because I dont have any idea as to the final construction cost of your design and of course and architect will usually charge based on a % of the final construction cost.
I hope this has been helpful, If you require any more information feel free to check out my website. We work all over Ireland.
Ryan Hood B.Sc B.Arch (QUB) RIBA
Architect
http://www.hbkarchitects.comMany thanks for your reply Ryan. The 48k works out at 12%.
The person that I am talking with at the moment handles planning, and contracts etc with the builder.
I appreciate that architects have undergone considerable education etc – however does that education not prepare them better for larger projects rather than a relatively small 3,000 sq ft project?
Is it like asking an artist to paint the wall of a house?? No one doubts the skills – but is it really necessary?
Thanks
twenty8,
Many Architects make their living only designing one-off house projects. A large proportion of CLASSIC examples of international building designs over the years have been one-off houses. Architects can apply their skills to the MICRO and MACRO design scales. Good Principles of Design are relevant to all scales of design.
Ryan Hood B.Sc B.Arch (QUB) RIBA
Architect
http://www.hbkarchitects.comA lot really depends on what you want yourself…
A qualified architect should be capable of producing a quality design which you should be happy with. Most have individual styles, which are generally reflected in in their designs… The same can of course apply to others who drawn or/design houses etc, be it engineers, architectural technicians etc,.
The best way to see who suites you is to see what they have done (designed)in the past… Some are more suited to designing houses than others.
It is probably obvious that an architect would be better at designing a house into context than an engineer or someone designing a house without visiting the site as would be the case with standard downloadable cad drawings.
Architects focus on design and primarliy delivering a client focussed solution as this is their brief however there are a number facotrs outside most architects sphere of expertise such as ground water conditions and proximity to heritage features.
Even the most expert architect will have problems designing a minimum impact house of 3000 sq ft which I would not consider relatively small by any stretch of the imagination. This would be further exacerbated if the subject site is in an upland area or close to a water source or is in any way proximate to any heritage features.
Some good general advice for those intended to develop any form of property is to get advice from an architect before acquiring the site.
3k sounds like a ridiculously small amount for anyone to be charging for the full service of obtaining planning, tendering, contract administration, site visits snagging etc which would be al inclusive in the percentage costs for full architectural services. Most people I know who are doing one off houses for people, whether technicians or architects (and either as nixers or otherwise) are charging at least 3k to bring a house of over 2000 sqft to planning stage and no further.
Whoever is offering to see your house to completion for that money is either doing you a serious favour or is severely inexperienced and does not have a clue how much work is involved in producng tender packages, construction packages, detail design and the general hassle of liasing with builders. Of course you could be planning to project manage the whole thing yourself in which case you’d probably be wise to look into how much time you’d need to take out of work (always much much more than you’d think) and to work out how much earnings you’d be losing as a result…
A good architect will invariably lead to a smoother, more successful project and wil increase your chances of getting exactly what you want for your money. Technicians / draftsmen / engineers are more likely to stick to the mundane and easy to achieve and you can guarantee your house will look exactly like about 500 other pvc covered horrors throughout the country.@BTH wrote:
Technicians / draftsmen / engineers are more likely to stick to the mundane and easy to achieve and you can guarantee your house will look exactly like about 500 other pvc covered horrors throughout the country.
Definately true of alot of engineers and draftsmen, however the same can’t be said of the technician with an architectural backround…
Examples of houses designed by a south-east firm of architectural technologists.
Admittely they will properly charge fees along the same lines of a qualified architect.
Not bad examples jackscout. The only way anyone could produce a building like that and charge low fees would be to re-produce this house type over and over. That is where a good architect will differ. A good architect will endevour to design a unique building that is site specific and driven by their clients needs and the generators of the area. (ie. orientation, views in/out of site, access to the site, local character and style of existing buildings etc)
Ryan Hood B.Sc B.Arch (QUB) RIBA
Architect
http://www.hbkarchitects.comIt’s a broad question to ask, but roughly how much would an architect charge for designing an ‘average’ 4-bed 2000 sq ft house?
Is €45-50,000 about standard?@Graham Hickey wrote:
It’s a broad question to ask, but roughly how much would an architect charge for designing an ‘average’ 4-bed 2000 sq ft house?
Is €45-50,000 about standard?from inception to completion, somewhere around 30 grand.
I’m quite happy with my personally designed home – I’m not sure there’s a single thing to be done to improve on it.
Thanks all the same though.
It could only happen in Ireland that the work of the IGS has in no small way contributed to the architectural travesties about the place…
A wing is an interesting concept sw101, though it’d have to be balanced out with another opposite – I’m thinking sunroom…conservatory…fairy cake…I’ll leave it up to youself the expert to decide, with your notions and gobbledegook.
However the frilly fascias must be replicated to the last detail; they’re specially imported from foreign I’ll have you know – Wrexham Industrial Estate’s finest.
- You must be logged in to reply to this topic.
